Search This Blog

Sunday, April 9, 2023

What is Embedded System write and Explain in Brief?

1. Embedded system is a combination of computer Hard ware, software and Real time opprating system ( RTOS).
2. Classifications.
3. Application's.
4. Case Study of Microwave, Traffic light, Washing machine.

Embedded system is a combination of computer Hard ware, soft ware and Real time opprating system ( RTOS).

It may perform with in a large system.
System can be programable or have a fixed functionality.
The perpose of Embedded system is to control is a specific function with in a device.
It perform Repeatedly function.

EXAMPLE:- Washing machine, Computer, Micro wave, Mobile phone.


Classifications of Embedded System.


Sensor:- Sensor helps measure the physical quentity and convert into electrical signal.
 The electrical signal can ready to observe by any electronic instrument and them signal goes to A-D converter.

A-D converter:- (Analog to Digital converter)
 It converter the analog signal serial by the signal and convert it to digital signal.
 It Encode the data.

Memory:- It is used for store informantion.
RAM = Random Access Memory
ROM = Read Only Memory

Processer:- It perform the control operation ( control Unit)
 In processer execution of data is done at the end and store in memory and signal are forward to the D-A converter.
 It perform the various types of operation (ALU).

Digital to Analog Converter:- 
 It decode the data.
 It convert the digital signal to analog signal.

Actuator:-
 The control signal comes from the processor it provide the desire output.

Application of Embedded system.
 Home Appliances.
 Office Automation.
 Security.
 Telecommunication.
 Instrumentation.
 Banking and Finance.
 Auto mobile Industry. 

 ⋆ Case study of Microwave with Embedded system .
A typical example of such as embedded system is in you microwave oven. The microwave often has a display key board and a number of a sensor and actuactors . sensor the detects whether the door is closed. 
Block Diagram of Microwave


Case study of Traffic light with embedded system.

A development of an intelligent traffic signal control (ITSC) system needs because present traffic light controller such as (AT89C51). Which has very less internal memory and no inbuilt ADC.
                                         The present traffic system have fixed time internal for green and red signal which does not provide the flexibility to the system the (ITSC) system will able to traffic light system.
1. Detection of traffic volume by using genetic algarithum.
 2. Emergence vehicle detection such as Ambulance, Police etc by using wireless sensors network (IR). Embedded at the signal intersection.
Block Diagram of Traffic Light signal

Case study of Washing machine with embedded system.

Embedded system in a washing machine for example would include closing and opening of valves to let water through onto casses are controller by microcontroller.


Sunday, April 2, 2023

Full form's in Cellular Communication.

Cellular Communication is a form of communication technology that enables the use of mobile phones. A mobile phone is a bidirectional radio that enables simultaneous transmission and reception, Cellular communication is based on the geographic division of the communication coverage area into cells, and within cells.

There are Many short and full Form's in Cellular Communication.

TOP 50 FULLFORM'S IN CELLULAR COMMUNICATION.

 1.BTS    =  Base Transceiver Station.

2.VoLTE = Voice over long term Evolution.

3.STD = Subscriber Trunk Dialing.

4.ISD = International subscriber Dialing.

5.PIN  = Postal index Number.

6.PCO = Public Call Office.

7.SMS = Short Message Service.

8.IMSI = International Mobile subscriber identity.

9.IMEI = International Mobile Equipment Identity.

10.PUK = Personal Unblocking Key.

11.MIUI = MI user interface. ( MI stands for Xomi mobile company)

12.WCDMA  = Wide band Code Division Multiple access.

13.SIM = Subscriber Identity Module.

14.2G,3G,4G,5G = Generation.

15.SAR = Specific Absorption Rate.

16.ISM = Industrial Syntific and Medical.

17.QAM  = Quadrature Amplitude Modulation.

18.FDD  = Frequency Division Duplexing.

19.TDD = Time Division Duplexing.

20.ITU= International Telecommunication Union.

21.TRAI = Telecom Regularly athority of India.

22.PSTN = Public switch telephone network. ( telephone exchange)

23.UMTS = Universal mobile telecommunication system.

24.EDGE= Enhance Data ( GSM/GPRS) Evolution.

25.GSM  = Global system for mobile communication.

26.GPRS = General packet radio service.

27.CDMA = Code division Multiple access.

28.TDMA= Time division multiple access.

29.FDMA = frequency division multiple access.

30.UI = User interface.

31.BSC = Base station controller.

32.MSC = Mobile switching center.

33.AVC = Advanced video coding / Audio visual connector.

34.HLR = Home location register.

35.VLR = Visitor location register.

36.GMSK = Gaussion Minimum shift key.

37.OFDMA = Orthogonal frequency Division multiple access.

38.HSDLPA / HSDPA = High speed downlink packet access.

39.AMPS = American mobile phone system.

40.AuC = Authentication Center.

41.HSULPA / HSUPA = High speed Uplink packet access.

42.EIR = Equipment Identity register.

43.FVC = Forward voice channel.

44.RVC = Reverse voice channel.

45.FCC = Forward control channel.

46.RCC = Reverse control channel.

47.RAT = Radio access Technology.

Certainly! Here are 100 full forms and abbreviations commonly used in cellular communication:

GSM: Global System for Mobile Communications
CDMA: Code Division Multiple Access
LTE: Long-Term Evolution
3G: Third Generation
4G: Fourth Generation
5G: Fifth Generation
IMEI: International Mobile Equipment Identity
SIM: Subscriber Identity Module
MIMO: Multiple-Input Multiple-Output
VoLTE: Voice over LTE
HSPA: High-Speed Packet Access
Wi-Fi: Wireless Fidelity
WLAN: Wireless Local Area Network
SMS: Short Message Service
MMS: Multimedia Messaging Service
USSD: Unstructured Supplementary Service Data
GPRS: General Packet Radio Service
EDGE: Enhanced Data rates for GSM Evolution
IoT: Internet of Things
NFC: Near Field Communication
VLR: Visitor Location Register
HLR: Home Location Register
BTS: Base Transceiver Station
BSC: Base Station Controller
MSC: Mobile Switching Center
EIR: Equipment Identity Register
RAN: Radio Access Network
OMC: Operations and Maintenance Center
BSIC: Base Station Identity Code
CSFB: Circuit Switched Fallback
SDR: Software-Defined Radio
IMS: IP Multimedia Subsystem
AMR: Adaptive Multi-Rate
SRVCC: Single Radio Voice Call Continuity
RNC: Radio Network Controller
PDP: Packet Data Protocol
APN: Access Point Name
PDCP: Packet Data Convergence Protocol
RLC: Radio Link Control
MAC: Media Access Control
PHY: Physical Layer
RRM: Radio Resource Management
NAS: Non-Access Stratum
RACH: Random Access Channel
CQI: Channel Quality Indicator
PCI: Physical Cell Identity
PRACH: Physical Random Access Channel
RSRP: Reference Signal Received Power
RSRQ: Reference Signal Received Quality
SINR: Signal-to-Interference plus Noise Ratio
HARQ: Hybrid Automatic Repeat Request
HSS: Home Subscriber Server
EPC: Evolved Packet Core
MME: Mobility Management Entity
SGSN: Serving GPRS Support Node
SGW: Serving Gateway
PGW: Packet Data Network Gateway
eNodeB: Evolved NodeB
RRC: Radio Resource Control
TCP: Transmission Control Protocol
UDP: User Datagram Protocol
IP: Internet Protocol
NAT: Network Address Translation
DHCP: Dynamic Host Configuration Protocol
DNS: Domain Name System
QoS: Quality of Service
VoIP: Voice over Internet Protocol
PSTN: Public Switched Telephone Network
VoWLAN: Voice over Wireless Local Area Network
SAR: Specific Absorption Rate
ERP: Effective Radiated Power
HAC: Hearing Aid Compatibility
OTT: Over-The-Top
IOT: Internet of Things
ESN: Electronic Serial Number
PRL: Preferred Roaming List
EVDO: Evolution-Data Optimized
PTT: Push-To-Talk
LAC: Location Area Code
RAI: Routing Area Identifier
PLMN: Public Land Mobile Network
BER: Bit Error Rate
VLR: Video Location Register
DTMF: Dual-Tone Multi-Frequency
SAR: System Architecture Evolution
RLC: Radio Link Control
BSS: Base Station Subsystem
CN: Core Network
CSG: Closed Subscriber Group
NMS: Network Management System
FM: Frequency Modulation
RF: Radio Frequency
QAM: Quadrature Amplitude Modulation
OTA: Over-The-Air
PDA: Personal Digital Assistant
GPS: Global Positioning System
RRU: Remote Radio Unit
TDD: Time Division Duplex
FDD: Frequency Division Duplex
NR: New Radio
These are 100 full forms and abbreviations commonly used in cellular communication. The field is extensive, and there are many more acronyms and abbreviations specific to different technologies and standards.



Popular Posts